Xmr403 4 Ton Hydraulic Road Roller Mini Asphalt Roller

Overview

Basic Info.

Model NO.	XMR403
Engine Type	Diesel Engine
Travel Speed	0-10.5km/H
Certification	EPA, CE, ISO 9001:2000, ISO 9001:2008
Condition	New
Drum Diameter	582 mm
Transport Package	Nude
Specification	23709852210mm
Trademark	SINOMADA
Origin	China
Production Capacity	100 Sets Per Month

Product Description

Product DescriptionXMR403 is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering. Performance Characteristics:* Closed hydraulic drive system is adopted to realize stepless speed change.* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product. * The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.* Large ground clearance and curb clearance, strong trafficabilit, good edge compaction performance. * The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions. * High frequency vibration and excitation force design, high working efficiency, good compaction effect.* This machine has also the air intake preheating function, can realize low temperature cold start. * Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC. Specification

Item	Unit	XMR403
Operating mass	kg	4000
Static linear load (front drum/rear drum)	N/cm	157/157
Vibrational frequency	Hz	60
Amplitude	mm	0.41
Exciting force	kN	42
Vibrating drum (Diameter x width)	mm	800x1300
Theoretical gradeability	%	30
Operating speed	km/h	0~10.6
Wheel base	mm	1920
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius	mm	3062 / 4362
Minimum ground clearance	mm	348
Engine type		ZN490B
Rated power	kW	36
Rated speed	r/min	2600

Packaging & Shipping

Xmr403 4 Ton Hydraulic Road Roller Mini Asphalt Roller

Products

Xmr403 4 Ton Hydraulic Road Roller Mini Asphalt Roller

Basic Info.

Product Description